Bilt Hamber Traceless

Traditionally formulated glass cleaners contain non-evaporating surfactants and soaps (that wet and clean) plus glycols, perfumes and dyes. During cleaning these can be left behind causing stubborn streaking and smearing.

Bilt-Hamber Laboratories use unique super-wetting, 100% evaporating surfactants to produce TRACE-LESS. These special surfactants leave no such residue. Unlike competing products that run quickly from vertical surfaces, TRACE-LESS instantly wets glass surfaces ensuring uniform application and minimal product run off.

The powerful, non-abrasive cleaners tackle greasy and dry particulate dirt more effectively than competing products. TRACE-LESS does not leave a hydrophobic coating and will not damage or remove quality glass sealants or rain repellents.

Use on interior and exterior glass. Only use clean lint-free cloths free of detergents and fabric conditioners – these will cause smearing.

How to use:

SHAKE WELL BEFORE USE.

 

Use on cool glass out of direct sunlight. Avoid overspray onto surrounding surfaces.

 

For exterior automotive glass and general glass cleaning:

1. Atomise a fine mist on the surface and wipe off whilst still wet with a waffle weave microfibre or similar lint free cloth turned regularly – buff until dry.

2. For maximum smear free cleaning reapply a very fine mist and wipe dry with suede microfibre.

Note; If glass has stubborn sealant residue, embedded wiper film, hard water marks or other stubborn bonded soil polish first with good quality glass polish.

 

For interior automotive glass. Avoid overspray onto surrounding surfaces:

1. Spray directly onto waffle weave microfibre or similar and wipe over glass surface turning cloth regularly.

2. Where the highest degree of finish is desired. Repeat as above using suede microfibre.

Read more Read less