Maniac Line Foam Gun PREWASH

Maniac Line Foam Gun Prewash - High-Performance Alkaline Prewash

Take your wash process to the next level with Maniac Line Foam Gun Prewash, a powerful, alkaline based prewash specifically formulated to break down stubborn dirt, road grime and traffic film before any contact wash begins. Designed for use with foam guns or foam cannons, this professional grade prewash helps eliminate up to 80% of surface contaminants, significantly reducing the risk of micro scratches and swirl marks.

Whether you're a seasoned detailer or a passionate enthusiast, this high foaming solution is your first line of defence in a safe and swirl free wash routine.

Why Choose Foam Gun Prewash?

Pre washing is crucial for safe auto detailing and this foam prewash ensures deep cleaning while preserving your car’s finish. Skipping the prewash step is one of the leading causes of paint marring. Maniac Line Foam Gun Prewash gently but effectively softens and removes contaminants so they don’t get dragged across the surface during the contact wash. The result? A cleaner, safer and more professional detailing finish every time.

Features

• Powerful Foaming Action: Produces dry, compact foam that clings to surfaces, effectively loosening stubborn dirt, smog, organic residues and bird droppings.
• Prevents Scratches: Removes up to 90% of dirt when used with a pressure washer, reducing the risk of micro scratches during manual washing.
• Safe for All Surfaces: Respects existing protective layers, including wax, sealants and ceramic coatings.
• Economical Formula: High dilution ratios make it cost effective for frequent use.
• Versatile Application: Designed for use with foam guns or manual sprayers.
• Pleasant Fragrance: Leaves a fresh, clean scent after application.
• Seasonal Adaptability: Optimised dilution ratios for summer and winter ensure consistent performance year round.

Do not use on motorcycles.

Foam Gun Prewash Dilution Ratios

• Foam Gun (Summer): 1:10 for a final output of 1:100
• Foam Gun (Winter): 1:5 for a final output of 1:50
• Pump Foamer (Summer): 1:100
• Pump Foamer (Winter): 1:50

How To Use Foam Gun Prewash

It is recommended to use the product with a foam gun, but it is also excellent for pre washing using a manual pump foamer.

Foam Gun:

Using a high pressure foam gun, in winter dilute the product with a ratio of 1:5, for a final output dilution ratio of around 1:50.

Using a high pressure foam gun, in summer dilute with a ratio of 1:10, a final output dilution ratio of around 1:100.

Spray a thick layer of foam on the vehicle and wait for it to run off (this may take up to 5 minutes).

Rinse the vehicle from top to bottom.

Pump Foamer:

Winter dirt 1:50 (2 caps of the product in 1 litre of water).

Summer dirt 1:100 (1 cap of the product in 1 litre of water).

Spray the product on the vehicle and wait 1 minute without letting the product dry on the bodywork, then rinse.

Rinse the vehicle from top to bottom.

FAQ

Can I use the product even without a foam gun?

Yes, you can use the product with a manual pump foamer. In this case, dilute as follows:

We recommend that you apply the product always from the bottom up, working on half the car at a time ensuring that the foam is never allowed to dry on the surface.

Can I clean it without a pressure washer?

Yes, although you won't achieve the same results. You will however, get the emollient action that helps soften the dirt, making it easier to remove later.

Can I apply the product directly onto the dirty surface or do I have to completely wet the car first?

Our advice is to wet the car first to cool the surface, especially in the summer season and to remove dust and coarse dirt, thereby increasing the safety of use.

Once the product has been applied to the surface, can I work with a brush or sponge?

No, because in this stage you are going to detach the coarse dirt from the surface, even strongly anchored dirt. Let the product work and take advantage of its chemical action. After you have rinsed it off, you can then proceed with the thorough washing of the car using a sponge, mitt and brushes for the most difficult areas and features such as emblems or grids.

What are the key steps before proceeding with the prewash of the car?

We always recommend that you start washing from the wheels and tyres with "Wheel & Tyre Cleaner" and remove any iron contaminants with "Iron Remover"

After the prewash, what can I use for the hand wash with the mitt?

For a maintenance wash, use the Neutral Foam Shampoo. For dark or wrapped cars, use "Black & Wrap Shampoo". Use "Ceramic Shampoo" to add a ceramic action to your wash and thereby achieve greater protection and a water repellent effect.