Maniac Line NEUTRAL Foam Shampoo

Maniac Line pH Neutral Foam Shampoo

Maniac Line Neutral Foam Shampoo has an above average foaminess on the market: its foam generated with a foam cannon creates a compact film, which remains adhered to the surfaces. It has an intense and homogeneous lubricating action and encapsulates dirt, facilitating removal during the subsequent rinsing phase without creating halos or streaks.

The great emollient capacities detach all the dirt present, acting in a delicate way. Its wax safe technology makes it suitable for frequent use because it respects the protection on the car, freeing it from surface dirt that could impair its performance.

Used when washing by hand with a bucket, Neutral Foam Shampoo boasts excellent economy of use: it can be diluted up to 1:400 making it ideal for frequent or maintenance washing.

Features

• 2 in 1 Versatility: Perfect for both hand washing and foam gun prewash applications.
• Neutral pH Formula: Safe for all surfaces and existing wax or sealant layers.
• Exceptional Foam Action: Creates a compact, adhesive foam layer for effective dirt encapsulation and removal.
• Highly Economical: Dilution ratios of up to 1:400 for hand washing, offering excellent value for regular use.
• Pleasant Bubble Gum Scent: Leaves your car smelling fresh after every wash.

Neutral Foam Shampoo Dilution Ratios

Prewash with Foam Gun: 1:10

Hand wash with bucket: 1:400 (3 caps of the product in 10L of water)

How To Use Neutral Foam Shampoo

Prewash with foam cannon:

• Foam the entire vehicle, always from the bottom upwards
• Wait approximately 4 minutes so that the foam thins out, being careful not to allow it to dry on the bodywork. Make sure you work in the shade
• Proceed rinsing with a pressure washer starting from top to bottom. The easy rinsing of the product allows you to easily remove the foam, in a short time and without leaving residues

Hand Washing with bucket:

• After the prewash you will be able to proceed with manual washing with a bucket with greater safety, having already removed 80% of the dirt and in particular all the coarse dirt, which risks causing the most damage if dragged onto the bodywork with a wash mitt
• Work starting from the top and always with the vehicle wet with a wash mitt
• Proceed in small areas, using the minimum pressure possible with a wash mitt. Rinse the wash mitt frequently in a bucket of clean water before moving on to the next panel. In this way you will remove the coarse dirt particles that remain trapped in the wash mitt itself and which could have an abrasive effect or worse create scratches on the paint, in the subsequent steps
• Neutral Foam Shampoo creates a soft, compact and highly lubricated foaming film which makes it safe on any type of surface, allowing you to wash the car without the risk of creating swirls or micro scratches
• Proceed with washing the entire vehicle, avoiding letting the shampoo dry on the bodywork During washing, its bubble gum fragrance will leave you pleasantly surprised
• Once you have finished washing you can proceed with thorough rinsing and subsequent drying with microfibre drying towel

FAQ

When can I use Neutral Foam Shampoo?

Neutral Foam Shampoo is the perfect product for frequent or maintenance washes.

What does maintenance wash mean?

This wash aims to keep your car clean, without damaging the underlying protection. Maintenance washes are generally carried out once a week or once every two weeks after a certain mileage. In this instance, you can use the Neutral Foam Shampoo with a foam gun or by hand.

What if the car has a high mileage or has been exposed to bad weather for a long time?

If your car has been exposed to the elements for more than two weeks or has travelled many kilometres, e.g. when returning from a trip, you may have to remove more stubborn dirt, such as traffic film. Our advice in this case is to use our Foam Gun Prewash for pre washing and only then move onto the manual washing with Neutral Foam Shampoo.

What should I do if I realise I have forgotten to rinse a part of the car when I am drying it?

Or if it has been in the sun too long and the shampoo has dried? No problem, here is a tip to easily solve the problem without having to rewash the car. Use Exterior Quick Detailer to safely and easily remove any marks or rings. In fact, it can be used as a drying and finishing aid after washing.

What can I do if I want to add gloss and protection after drying?

To add deep gloss and protection, we recommend using Ceramic Ultra Speed Wax.

What is the difference between doing a prewash with the Foam Gun Prewash and the Neutral Foam Shampoo?

With Foam Gun Prewash, the foam remains compact and adheres to the surface, softening stubborn dirt more easily, while Neutral Foam Shampoo has a high lubrication and dilution capacity of up to 1:400, but a much lower surface adhesion capacity and is therefore not recommended for stubborn dirt.

Why do I need to use 2 buckets?

Because one bucket is used for the water/shampoo solution and the second bucket for clean water only. Every time you wipe the mitt over the panel of your car, first rinse it in the bucket with clean water and then dip it into the bucket with the water and shampoo solution. This will prevent any residue still present on the surface from being moved from one panel to another, which could lead to annoying swirls or scratches.

Why should I wash the car in sections?

This is to ensure that the dirt from one section does not move into another section which could then scratch the paintwork.